Menred Ess Outdoor Cabinet Ess System Commercial Outdoor Battery Energy Storage Cabinet off-Grid Solar System

• Customization: Available
• Nominal Voltage: 230-400
• Nominal Capacity: 202kwh
• Model NO.: ESS. 1.100215
• Selling Units: Single Item
• Grid Connection: off Grid Hybrid Gridon Grid
• AC Output Voltage: 230V/400V
• Cooling: Liquid Cooling
• Battery Voltage: 768V.672V-876V
• Output Power: 100kw
• Sts(Optional): 240kw
• MPPT(Optional): 60kw
• PV Input Voltage: 1000vmax,200V~850V
• Battery Type: LiFePO4
• Voltage Range: -15%~10%
• Dimension (L*W*H): 1620*1500*1900mm
• Weight: 3.1t
• Battery Capacity: 215kwh
• Single Package Size: Xxcm
• Trademark: MENRED ESS
• Origin: Zhejiang, China
• Production Capacity: 1000 PCS/Month

Product Description

ESS.I.100215

* The ESS.I.100215 commercial and industrial photovoltaic energy storage system consists of a built-in 60KW MPPT controller module, a 100KW PCS (Power Conversion System), and a 240KW STS (Smart Static Switching) module.

* It utilizes a professional air conditioning system in the energy storage cabinet for intelligent temperature regulation. It is
equipped with a gas-based fire suppression system, as well as temperature and humidity sensors, water intrusion sensors, BMS (Battery Management System), and EMS (Energy Management System).

* An independent UPS (Uninterruptible Power Supply) provides backup power specifically for the EMS, allowing users to view system faults even in the event of a power outage.

Model	ESS.I.100215		ON-Grid Parameters
Rated Capacity	215kWh 0.5C@25°C			Rated Voltage	230Vac/400Vac
Products Size(W*D*H)	1620*1500*1900mm			Voltage Range	-15%~10%
Products Weight	3.1 T			Reted Frequency	50HZ/60HZ
Battery Voltage	768V			Max ON-Grid Power	100kW
Battery Voltage Range	672V-876V			Max Output Current	150A(150*380*1.732=100kw )
Max Dis/Charge Power	100kW			THDi	<3%(Rated Output Power)
Operate Altitude	<2000M			OFF-Grid Parameters (Automatic bypass requires configuring an STS)
Cooling System	Industrial Air Conditioning			Rated Voltage	230Vac/400Vac
ON-Grid/Off-Grid Mode	Manual/Automatic(Optional)			Output Voltage Accurancy	1%
Grid Type	3P+N+PE			Max Output Current	150A(150*380*1.732=100kw )
Fire Extinguishing System	Aerosols			THDv	<1%(Linear load)
IP Grade	IP54			Rated Frequency	50HZ/60HZ
Operate Temperature	-15~50°C(>45°C Quota reduction)			Over Load Capacity	110% 10min; 120% 1Min @35°C
Communication Protocal	Modbus-TCP/Modbus-RTU			Battery Pack
Unbalanced 3phase Load Capacity	100%			Battery Cell	Lithium lron Phosphate (cobalt-free)-LiFePO4
				Battery Cluster		15 units in series@768V/215kWh
					Battery Module	51.2V/280Ah/14.33kWh(1P16S)
					Cycle Life	>6000 times@25°C&0.5C
						Standards	GB/T 36276, IEC62619, UN38.3

Battery Pack

High efficient cooling structure deisgn. Battery cells are placed in separated blocks, and amid with 3mm distance for heat
dissipation. What's more, equipped with dual ventilations increase the heat dissipation efficiency.

Main Electric Control Box

Centralized control for BMS, circuit protection, and equipment's power supply, such as ventilation, air conditioner, EMS, BMS.

MPPT

Optional configuration for OFF grid scenario. It is available in options of 30KW/60KW, with a modular design and adopting
interleaved parallel technology, allowing for parallel expansion.

PCS

·The PCS is available in options of 30KW/60KW/100KW with a modular design, utilizing advanced control algorithms to enable
multi-unit parallel operation and strong system scalability. · It has constant voltage, constant current, and constant power
modes, supporting grid-tied and off-grid operations, and can intelligently switch between various modes. · It has reactive power
compensation and harmonic compensation functions. · It supports 100% three-phase unbalanced load and can be connected to a
single-phase system.

STS

· The STS provides options of 120KW/240KW with a modular design, enabling easy and simplified installation. · It supports
automatic switching between grid-connected and off-grid modes. · It enables fast separation of the power grid and micro-grid, with
a switching time of less than 20ms. · It is designed with high reliability backup to ensure uninterrupted power supply to critical
loads.

Fire Fighting System

Equipped with a fully submersible aerosol fire suppression system, with dual control through thermal sensitivity and feedback
interfaces.

Cooling System

Equipped with dedicated industrial air conditioning for the energy storage cabinet, the temperature of the energy storage
batteries is controlled independently.

EMS System

Internal temperature and humidity sensors are installed and connected to the Energy Management System (EMS) for dual response. And it has independent power supply UPS, allowing remote monitoring of fault causes even when the system experiences failures.

Menred since 1995, is a leading global manufacturing industry cluster of "radiant heating and cooling, ventilation, water purification and smart home", a partner of the National Key Laboratory of "Future Building" and a certified factory of Electrolux AB(a leading global appliance company). 'MENRED Comfort Home'went from temperature control to systematic air conditioner, from saving on bill to energy efficient, from product to user thinking. We are passionate about comfort home product solutions, innovative development of green building equipment, engineering application and research of Building Integrated Photovoltaic (BIPV) and energy storage.

Under our group, there are 4 National High-tech Enterprises and 3 High-quality Development of Technologically Advanced Enterprises, which have been awarded the national government title of 'technologically advanced little giant' and Service Oriented Manufacturing Demonstration Enterprise.

Electronics workline

Boiler production line

 

Kraussmaffei PE-RT line

Q: Are you a factory?

A: Yes, we are an international trading department belong to MENRED Group. We own three factories.

 

Q: I need your price list of all your products, do you have a price list ?

A: Please send us your message and submit, then we will send your interested products' price list as soon as possible.

 

Q: I can't find the product on your catalogue, can you make this product for me?

A: Our catalogue shows most of our products, but not all. So just let us know what product do you need, and how many do you want. If we do not have it, we can also design and make a new mould to produce it. For your reference, making an ordinary mould will take about 35-45 days.

 

Q : Can you make customized products and customized packing?

A: Yes. We made a lot of customized products for our customer before. About customized packing, we can put your Logo or other info on the packing.

 

Q: Can you provide samples ? Are the samples free ?

A: Yes, we can provide samples. Normally, we provide 1-3 pcs free samples for test or quality checking. Please contact us for free samples.

 

Q : How to ship my order ? Is it safe?

A: For small package, we will send it by Express, such as DHL,FedEx,UPS,TNT,EMS. That's a Door to Door service. For big packages, we will send them by Air or by sea. We will use good packing and ensure the safety.

 

Q: Do you have a guarantee of your product quality?

A: We have a guarantee of three years.

 

Q: What do I need to become a retailer of MENRED brand?

A: A offline or an online store are available.

 

Q: Is there an application fee?

A: No, it's free to apply.

 

Q: What's the price and Min. Order?

A: It depends on your business region. You will receive detail pricing and order information if you submitted the application.

 

Q: What will MENRED do for retailers?

A: * To remain a competent, high-performance partner with our customers

* To lower cost * To ensure quality

* To maintain deadlines Any requirements or question, welcome to "Send" us an e-mail Now!!!