CE Certificated Energy Storage System Floor Installation LFP. 6144. W Lithium Battery with 51.2V120ah Support 6000W Inverter

• Customization: Available
• Type: Lithium-Ion Battery Pack
• Connection Mode: Series and Parallel
• Model NO.: LFP. 6144. W
• Rechargeable: Chargeable
• Discharge Rate: High Discharge Rate
• Size: Medium
• Accessories Type: Battery
• Rated Capacity: >1000MAH
• Standard Voltage: >12V
• Usage: Energy Storage
• Electrolyte: Li-ion
• Cycle Life: [email protected]&25c
• Selling Units: Single Item
• Compliance Standard: IEC62619, IEC61000, UL1973
• Grid Connection: off Grid, Hybrid Grid
• Output Power: 6kw
• BMS Current: 120A
• Charge/Discharge Current: 120A(1c)
• Single Gross Weight: Kg
• Operate Temperature: Discharge:-20c to +50c Charge:0c to+50c
• Operate Voltage: 44.8VDC-57.6VDC
• Single Package Size: Xxcm
• Transport Package: 70X50X40cm
• Specification: 70kg
• Trademark: Menred ESS
• Origin: China

Product Description

MENRED ESS is committed to using freshly produced LiFePO4 cells, ensuring that the entire process from cell production to assembly into battery PACKs is strictly controlled within 90 days. This approach consistently maintains the cells at their best in terms of performance, reliability, and long-term stability.

LFP.6144.W

* Selecting inverter communication protocol directly on the touch-screen.
* Battery Cycle Life >6000 Times @ 25°C&0.5°C.
* Max Parallel 16pcs to 98.24kWh.
* Discharge/Charge 120Amp.
* Support 6000W Inverter.
* Support 27 Inverter Communication protocols.
* Warranty: 5 Years/10 Years(Option).

Model	LFP.6144 .W
Battery Cell	Lithium Iron Phosphate (cobalt-free)-LiFePO4
Energy Capacity	6.144kWh
Usable Capacity	5.83kWh
Nominal Voltage	51.2Vdc
Operate Voltage Range	44.8Vdc-57.6Vdc
Max Charge Current	120Amp
Max Discharge Current	120Amp
Max Parallel	16pcs to 98.24kWh
Cycle Life	≥6000times @ 1C 0.5C & 25±2°C
Operate Temperature	Battery discharge:-10°C to +50°C, Battery Charge: 0°C to +50°C
IP Grade	IP21
Installation	Wall-Mounted or Floor Installation
Communication Port	CAN/RS485
BMS Monitoring	SOC, System Voltage, I/O Current, Cell Voltage, Cell Temp, Battery Status, Fault code
Support Inverter Brands	CAN: Victron V1.0/SMA V2.0/ Studer V1.03/CNBOU V1.0/ PYLON V1.3/Goodwe V1.5/SUNGROW V1.3/Solis V1.0/ SOFAR V1.0/Growatt V1.05/Growatt V1.01/Luxpower V1.0/ Sol-Ark V1.2/TBB V1.02/Deye V1.0/LIVOLTEK V1.0/ Sorotec V1.0/MEGAREVO V1.01/Afore V1.0/Sacolar V1.05 RS 485: PYLON V3.5/DEYE V1.0/SRNE V1.3/Growatt V2.01/ SMKSOLAR V2.01/EPEVER V1.4/Voltronic V1.0
Products Size(W*D*H)	600*440*210 mm
Weight	65kg
Warranty	5Years/10Years(Option)

Support Inverter Brands

Optimized structural safety

The unique design of integrated plastic fixed modules ensures a gap of 7mm between battery cells. Ensure sufficient and uniform
heat dissipation space during full load charging and discharging to avoid rapid aging and cell swelling caused by insufficient
heat dissipation at the battery center. Reduce risks of battery short circuits and overheating.

Efficient laser welding

Using aluminum connection straps that are three times the rated current to reduce series losses and heat generation between
battery cells. The laser seamless integrated automation production line welding ensures the reliable connection of battery cells,
avoiding the risk of detachment and false welding caused by inaccurate welding point positioning.

Comprehensive protection BMS

The battery protection system with up to 115 sensing protections provides comprehensive protection for battery cells. It has a
passive balancing function that automatically balances the cells when charging or discharging to their limits, ensuring a high
level of cell consistency. This helps maintain the overall battery performance with minimal degradation.

Unique connection design

The unique connection design includes a hot-pluggable interface and a concealed top and bottom entry/exit terminal. It features
compatibility for both wall mounting and stacking, offering a space-saving and easy
installation solution. It supports parallel connection of up to 16 battery modules, allowing the energy storage system to expand
up to 98.3 kWh capacity.

Touchscreen EMS panel

It is equipped with a 2.8-inch touchscreen LCD display that can show detailed information such as system SOC (State of Charge),
status, and fault messages.
The display screen allows easy switching of communication protocols and is compatible with 27 major inverter brands on the market.
It also supports Bluetooth and Wi-Fi configuration, allowing users to monitor the
battery's operation in real-time through an app. This enables convenient online monitoring of the battery's performance.

EVERY battery will undergo a cycle test, including full charge and discharge to test its protective performance. All data will be
saved in the system.

THE batteries from the same batch are compared through curve analysis to ensure a high level of consistency for each battery

PERFORMING operational simulation experiments to simulate real-life usage scenarios and validate battery performance.

Menred since 1995, is a leading global manufacturing industry cluster of "radiant heating and cooling, ventilation, water purification and smart home", a partner of the National Key Laboratory of "Future Building" and a certified factory of Electrolux AB(a leading global appliance company). 'MENRED Comfort Home'went from temperature control to systematic air conditioner, from saving on bill to energy efficient, from product to user thinking. We are passionate about comfort home product solutions, innovative development of green building equipment, engineering application and research of Building Integrated Photovoltaic (BIPV) and energy storage.

Under our group, there are 4 National High-tech Enterprises and 3 High-quality Development of Technologically Advanced Enterprises, which have been awarded the national government title of 'technologically advanced little giant' and Service Oriented Manufacturing Demonstration Enterprise.

Electronics workline

Boiler production line

PE-Xa extrusion line Made in Germany

Kraussmaffei PE-RT line

Q: Are you a factory?

A: Yes, we are an international trading department belong to MENRED Group. We own three factories.

 

Q: I need your price list of all your products, do you have a price list ?

A: Please send us your message and submit, then we will send your interested products' price list as soon as possible.

 

Q: I can't find the product on your catalogue, can you make this product for me?

A: Our catalogue shows most of our products, but not all. So just let us know what product do you need, and how many do you want. If we do not have it, we can also design and make a new mould to produce it. For your reference, making an ordinary mould will take about 35-45 days.

 

Q : Can you make customized products and customized packing?

A: Yes. We made a lot of customized products for our customer before. About customized packing, we can put your Logo or other info on the packing.

 

Q: Can you provide samples ? Are the samples free ?

A: Yes, we can provide samples. Normally, we provide 1-3 pcs free samples for test or quality checking. Please contact us for free samples.

 

Q : How to ship my order ? Is it safe?

A: For small package, we will send it by Express, such as DHL,FedEx,UPS,TNT,EMS. That's a Door to Door service. For big packages, we will send them by Air or by sea. We will use good packing and ensure the safety.

 

Q: Do you have a guarantee of your product quality?

A: We have a guarantee of three years.

 

Q: What do I need to become a retailer of MENRED brand?

A: A offline or an online store are available.

 

Q: Is there an application fee?

A: No, it's free to apply.

 

Q: What's the price and Min. Order?

A: It depends on your business region. You will receive detail pricing and order information if you submitted the application.

 

Q: What will MENRED do for retailers?

A: * To remain a competent, high-performance partner with our customers

* To lower cost * To ensure quality

* To maintain deadlines Any requirements or question, welcome to "Send" us an e-mail Now!!!